High speed CNC machining center V8 based on Taiwan technology, which has more advantages on operation and capabilities compared with like products. Applied with high rigid C design on structure, it also has been done with reinforcement on machine ribs. All the contact faces have been scraped manually, which guarantees the durability of accuracy
|Distance from the table to the ground||850mm|
|X axis travel||850mm|
|Y axis travel||500mm|
|Z axis travel||580mm|
|Distance from spindle center to column front||623mm|
|Distance from spindle end to work table||120～700mm|
|Max. load bearing of worktable||500kgs|
|Spindle hole taper||BT40|
|Max. spindle speed||12000rpm|
|Spindle sleeve diameter||φ140mm|
|Max. feed speed||15000mm/min|
|Rapid feed speed (X/Y/Z)||48/48/36m/min|
|Tool magazine capacity||24T|
|Max. length of tool||300mm|
|Tool change time||1.5s|
|Positioning accuracy (National standard)|
|Positioning accuracy (X/Y/Z)||0.008mm|
- X/Y axis apply with two types of roller guide way: ball and roller guide way, which is optional to customer’s requirements.
- Z axis applies roller guide way, which enables the machine to be with high rigidity, low noise, and small friction. Thus the machine can do rapid displacement and obtain circular accuracy.
- Equipped with air tank, the spindle and tool magazine can keep safe when air supply is insufficient.
- Spindle is connected directly,and the highest speed is 12000/1 5000/18000 rpm, which is a good choice for machining of high accuracy and efficiency.