Menu

New Product (2)-Mill Machine with Variable Speed


New Product (2)-Mill Machine with Variable Speed
0 Comments

WMT CNC mill machine has several functions: milling ,drilling, tapping, boringetc. It’s suitable for cutting, processing and repairing single or small batches parts of all professions. It is of high quality, good function, easy operation, and not limited to skill operator.Now we will introduce this new product- ZX32G/1(is an upgrade to the ZX32G) with variable speed.

Features:
Reversible spindle and tapping controls.
Coarse/fine spindle downfeed with stops.
6-Speed gearbox.
Precision-ground dovetail ways and column.
Headstock tilts left and right.
Specification

Specification
ZX32G/1
Max. drilling capacity
32mm
Max. tapping capacity
M16
Max.face milling capacity
63mm
Table size
700×190mm
Spindle taper
MT3/R8
X-axis travel
380mm
Y-axis travel
230mm
Z-axis travel
350mm
Spindle travel
75mm
T-slot size
12mm
Spindle speed range (variable)
50-2300rpm
Headstock tilt left and right
90 degree
Base size
542×340mm
Max. distance from spindle center to column
214mm
Max. distance from spindle to table
400mm
Min. distance from spindle to table
50mm
Motor power
750W
N.W/G.W
170/200kgs

Details of mill machine as below:

Preparing for milling:
  1. The micro feed handle wheel is used for adjusting feed depth. Revolve handle clockwise to make the worm gear connect with handle base, turn the micro handle wheel to make milling cutter reach demanded place. Regarding its rigidity, the socket couldn’t extend too long.
  2. The locking socket handle is used for locking socket. You can use locking handle to lock socket when the milling cutter up to demanded place.
  3. There are two lock screws at the front of and in the left of table separately to lock the table. If necessary, you can lock the table to stop it moving.
  4. The movable fixed block in the front of the table is ready for spacing as working. Loosen screw, move the fixed block to the requisite position, then tighten up the screw before operating.
  5. When you want to change the gearbox angle in the left or right, please loose the three nuts linking with gearbox and the slip saddle, then adjust it to demanded place. Lock the three screws again.
  6. If the machine has a strange voice or has breakdown. You should cut off power source at once, to find reason and fix it in time.

Standard accessories:

1.Drill chuck key
2.Drill chuck arbor R8
3.Bottle for oil
4.Screw driver
5.Screw driver flat #2
6.Hex wrench set(5pcs)
7.Wrench 17x19mm open-ends
8.Spindle wrench 40mm
9.Drawbar
10.T-bolt M10-1.5
11.Hex nut M10-1.5
12.Flat washer 10mm
13.Drill chuck B16 3-16mm
14.Tool box

If you want to know more information for this mill machine ZX32G, pls contact with us.
Email:info@wellmachtool.com

WhatsApp chat