Menu

New Product (3)-Mini CNC Lathe Machine


New Product (3)-Mini CNC Lathe Machine
0 Comments

WMT CNC mini CNC Lathe has several functions: turning inner and outer cylindrical surface, end surface, taper surface and thread of shaft, etc. Our engineer update this CNC lathe with beauty appearance. Now we will introduce this new product- CNC210.

Features:

1.Full enclosure complete, safe and easy operation

2.4 position toolpost as standard, 4 position electrical toolpost is for optioanl selection

3.Servo main motor

4.Small size and cheap price

5.Lower noise and high precision

6.Suitable for educational training and mould machining

Specification

Specification CNC210
Max. swing over bed 210mm
Distance between centers 400mm
Spindle bore dia. 26mm
Spindle taper MT4
Spindle speed 3000rpm
Tool post 4-position
Gangtool bar size 12mm
X-axis  travel 90mm
Z -axis travel 300mm
X moving speed 2000mm/min
Z moving speed 2000mm/min
Spindle motor power 1.2kw
X motor torque 3N.m
Z motor torque 3N.m
Min. setting unit 0.001mm
Tailstock dia. 22m
Tailstock tavel 50mm
Tailstock taper MT2
Overall size 1170X700X860mm
N.W 200kgs

Main parts of CNC Lathe

1.Main drive system

The machine main motor direct drive spindle motor, spindle box has cancelled the gear transmission mechanism, simple structure, easy maintenance, high reliability. Transmission through the main motor by DC brushless motor, DC stepless speed regulation. Spindle positive inversion through the electrical system control, positive inversion has the same speed.

2.Work piece clamping mechanism

The configuration of the machine tool work piece clamping mechanism is three jaw chuck and the power source is manual .

3.Feed drive system

X axis, Z axis feed motion is by two step through the coupling (synchronous belt and synchronous belt wheel) connected with the ball screw nut pair then by the ball screw nut transfer to the carriage or in a small trailer to achieve. Ball screw nut pair has been pre- tight, can achieve high precision gap less transmission.

4.Photoelectric encoder drive system

The main spindle photoelectric encoder is driven by the synchronous belt wheel on the main spindle to drive the synchronous belt wheel on the encoder seat.

5.Tool post

The machine can be used in two rows tool carriers,and can be equipped with four electric station.The electric post’s transposition locking directly from the electric post built-in motor drive, direct control by the NC system.

6.Tailstock

Tail stock is manual tail stock. Tail stock manually according to the eccentric principle locking on the bed, with the hand cranking wheel moving screw the tail stock sleeve forward backward; loosen eccentric locking mechanism, manual movement of the tail stock body sliding back and forth. When the work is carried out by using the tail seat, the locking sleeve is needed to be locked.

If you want to know more information, pls contact with us. Email:info@wellmachtool.com

WhatsApp chat